1. Remove mould
Use a dilute bleach solution or a fungicidal/mould cleaner to clean off any mould. We recommended doing this the day before you plan to paint – this will give the surface time to dry properly.
Take care when using chemicals – use eye and skin protection and follow the instructions on the product.
2. Clear the room
You’ll want to remove all items from the room, including any fixtures, such as towel rails or toilet roll holders. Keep any screws together in a sealed bag so you don’t lose them.
3. Prepare your surfaces
Remove any loose paint with a scraper, and fill cracks or holes with a water-resistant filler. When the surface is dry, sand it down to create a smooth surface.
Lightly sand any previously painted woodwork too, so that the new paint will adhere well. Vacuum up any dust.
4. Clean your surfaces
Use sugar soap or a detergent solution to remove any grease, then rinse with cold water. This will also help to remove dust residue from the sanding and ensure the paint sticks well to your surfaces.
5. Protect your floor
Cover the bathware and floor with dust sheets, and tape small plastic bags around your shower head and taps. If you’re not painting your tiles, you may want to stick some low-tack masking tape over the edge of tiles so you get paint on them.
6. Prepare your paint and tools
We recommend you use a specialty bathroom paint, such as Dulux Mouldguard. This will help your surfaces repel mould and withstand the effects of water, steam and moisture.
You’ll need a roller to paint the walls and ceiling, and a small brush for touching up and cutting in.
7. Paint the ceiling
When you’re ready to begin painting, start by painting the ceiling. That way, any paint drips will fall onto unpainted surfaces and you can easily wipe them off or paint over them later.
If you’re painting your walls and ceiling two different colours, you’ll need to ‘cut in’ the corners to achieve a flawless finish. Follow our step-by-step guide to cutting in.
8. Paint the walls
Next, it’s time to paint the walls. A clever trick is to overlap the paint a few centimetres or so over the woodwork – this will create a nice clean line when it’s time for the next step.
If you’re painting any tiles, we recommend you use a specialty bathroom tile paint. This will help to protect the surface against mould.
9. Paint the woodwork
10. Put everything back in place
Once you’ve given the paint plenty of time to dry (we recommend you follow the drying time instructions on the paint can), you can begin to move everything back into the room. Reattach your fixtures and you’re ready for a long soak in the tub!