Inspiration
Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
If you have concerns about your privacy?
Read our Privacy Policy.
How to paint skirting boards
Freshly painted skirting boards can make a huge impact on any room, but not knowing how to paint skirting boards is often the force holding you back.
- Pick your colour. As a general rule, your skirting boards should follow the same colour tone as your walls. Darker skirting boards will give your space a more modern, contemporary feel, while lighter colours will help make small rooms appear larger. If you’re still unsure, play it safe and choose a crisp, pure white.
- Choose your brush. For most skirting boards, a two-inch (5cm) brush is ideal. If you’re using a water-based paint, be sure to use one with synthetic bristles.
- Sand your surface. This allows the paint to bond and prevent future chipping. Use a soft dry brush to remove loose paint and dust.
- Create a clean base. If your boards are chipped or dirty, give them a good clean with a solution of mild soap and water (washing-up liquid or sugar soap works perfectly).
- Tape up your edges. Applying masking tape around the edge of the floor will help you to create clean lines with a professional finish. If your floor is carpeted, press the edge of the tape down with a blunt edged tool. This will ensure the paint doesn’t ‘creep’ under the tape.
- Start painting. Work the paint into the brush up to about half of the bristles, wipe away the excess paint and cut in to the top of the skirting first, applying the paint evenly and working in sections about a metre long. Always make your final stoke of the brush along the length of the board.
- Apply a second coat. You should give solvent-based paint 24 hours to dry but water-borne paint takes less time, so follow the advice on the can before applying your second coat. There’s no need to sand between coats.
- Remove the tape. Once the second coat is fully dry, carefully remove the masking tape. If the carpet has been masked, push down the edge of the tape to “break” the seal before removing it to unveil your perfectly painted skirting boards.
