Hammerite Direct to Rust Metal Paint - Hammered Finish

BLACK 9005
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Smooth Gloss
  • Coverage 5 m²/litre
  • Drying Time Touch/Surface Dry: 2 hours approximately • Intercoat Period: 4 hours
    NOTE: Times may change depending on weather conditions.
  • Coats 2
Product Features
  • 3 in 1 Paint- Primer undercoat and topcoat all in one can
  • Up to 5x better anti-rust protection compared to regular metal paints
  • DUALTECH technology provides two-way protection
  • Quick Drying enables quick recoat
  • Resists dirt pick up

Product Description

Hammerite Direct to Rust Metal Paint is specially formulated to perform as a primer, undercoat and topcoat in one.The decorative hammered appearance is smooth to the touch and sheds water well. It gives the metal a subtle hammered effect with a metallic sheen. It is ideal for a wide range of metal surfaces including trailers, down pipes, gutters, gates, railings and garden furniture.

Application Description

As a corrosion-resistant and decorative coating for ferrous metals and certain plastics.

Health & Safety

Keep out of the reach of children, away from food, drinks and animal feed. Avoid contact with skin or eyes. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well ventilated areas. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Remove as much paints as possible from brushes and rollers before cleaning. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Do not use empty container for storing food. If swallowed seek medical advice immediately and show this container or label. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Avoid release to environment. Do not empty into drains or water course. Dispose of used container in compliance with local regulation. Safety data sheet available for professional user on request.

Tips & Advice

  • 1. Cleaning
    Clean all equipment with Hammerite Thinner & Brush cleaner after use.
  • 2. Storing
    Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
Fetching the data, please wait...