Hammerite Direct to Galvanised Metal Paint

BLACK 9005
Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Smooth Gloss
  • Coverage Up to 8 m2/L for one coat at recommended dry film thickness (brushing).
  • Drying Time 4 hours touch dry, 6 hours - recoatable
  • Coats 1
Product Features
  • 3 in 1 Paint: Primer undercoat and topcoat all in one can
  • Up to 5x better anti-rust protection compared to regular metal paints
  • DUALTECH technology provides two-way protection
  • Quick Drying enables quick recoat
  • Resists dirt pick up

Product Description

Hammerite Direct to Galvanised Metal Paint is specially formulated as a primer, undercoat and top coat in one for application straight onto non-rusting metal, such as galvanised steel, aluminum, copper and brass. Available in six popular colours, Hammerite Direct to Galvanised Metal Paint enables you to create the look of your choice. With its one coat application, painting these tricky metals has never been quicker or easier.

Application Description

BRUSH - Suitable for small areas.
• Stir before use
• One coat will normally be sufficient but additional coats
may be required when applying over contrasting colours
• Ensure edges and corners are adequately coated
ROLLER - Suitable for larger, flat areas.
• Hammerite Direct To Galvanised Metal Paint is designed to be ready for use
• The edges should be brushed in first and the remaining areas quickly filled in with the roller
• For best results apply liberally using short, quick strokes

Health & Safety

Keep out of the reach of children, away from food, drinks and animal feed. Avoid contact with skin or eyes. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well ventilated areas. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Remove as much paints as possible from brushes and rollers before cleaning. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Do not use empty container for storing food. If swallowed seek medical advice immediately and show this container or label. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Avoid release to environment. Do not empty into drains or water course. Dispose of used container in compliance with local regulation. Safety data sheet available for professional user on request.
  • direct_to_galvanised_metal_paint_singapore.pdf
  • HM_GB_EN_DIRECT_TO_GALVANISED_METAL_PAINT_SINGAPORE.pdf

Tips & Advice

  • 1. Cleaning
    Clean all equipment with Hammerite Thinner & Brush cleaner after use.
  • 2. Storing
    Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.