Dulux Weathershield

All weather protection with Keep CoolTM energy saving solution
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Low Sheen
  • Coverage 12-13 m²/litre
  • Drying Time 2 - 3 hours
  • Coats 2
Product Features
  • Keep Cool™, heat reflective property, reduces surface temperature by up to 5 degree Celsius*
  • Colour Lock Technology, protects against colour fading caused by UV
  • Fungus & algae resistance
  • Low odour, even when freshly painted
  • Environmentally preferred paint (Singapore GreenLabel certified)

Product Description

For exterior walls

Health & Safety

Keep out of the reach of children, away from food, drinks and animal feed. Avoid contact with skin or eyes. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well ventilated areas. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Remove as much paints as possible from brushes and rollers before cleaning. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Do not use empty container for storing food. If swallowed seek medical advice immediately and show this container or label. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into drains or water course. Dispose of used container in compliance with local regulation. Safety data sheet available for professional user on request.

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean and dry out completely. Remove all loose
    paint or powdery residue by brushing/ scrapping with a stiff fibre brush or
    high pressure water jet. Treat areas affected by mould, lichens, algae and
    moss with Dulux Fungicidal Wash. Surface imperfections, misalignment and
    protrusions must be levelled and patched and completely flushed to
    surrounding surfaces. If surfaces remain powdery, friable or chalky after
    thorough preparation, seal with one coat of Dulux Sealer (solvent-based).
    Note: Do not apply Dulux Weathershield during wet weather.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
Fetching the data, please wait...