Dulux Weathershield Roof

Premium roof paint with Keep CoolTM energy saving solution
CRAYON 17144
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Low Sheen
  • Coverage 15m²/5 litres
  • Drying Time 2 - 3 hours
  • Coats 2
Product Features
  • Keep Cool™, heat reflective property, reduces surface temperature by up to 5 degree Celsius*
  • Savings up to 15% on the energy used to cool your home
  • Colour Lock Technology, protects against colour fading caused by UV
  • Fungus & algae resistance
  • Alkali resistance
  • Low odour, even when freshly painted
  • Environmentally preferred paint (Singapore GreenLabel certified)
  • No added lead and mercury

Product Description

For exterior roof tiles

Health & Safety

Keep out of the reach of children, away from food, drinks and animal feed. Keep away from combustible material and sources of ignition – no smoking. Avoid contact with skin or eyes. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well ventilated areas. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Remove as much paints as possible from brushes and rollers before cleaning. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Do not use empty container for storing food. If swallowed seek medical advice immediately and show this container or label. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher- Never use water Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into drains or water course. Dispose of used container in compliance with local regulation. Safety data sheet available for professional user on request.

Tips & Advice

  • 1. Preparing the Surfaces
    Surface to be painted must be clean to ensure good adhesion. Remove all
    loose or defective paint or powdery residues by thorough brushing and
    scraping, using a stiff fibre brush with running water or high pressure water
    jet. Treat any area affected by mould, lichens, algae and moss with
    Dulux Fungicidal Wash. Make good minor cracks with appropriate sealant or
    patching compound. Use sand and cement mix for larger holes and cracks.
    Allow to dry before priming with Dulux Sealer (solvent-based). Note: Paint
    will not adhere on dirty and powdery substrates which are not thoroughly
    cleaned. Do not apply Dulux Weathershield Roof during wet weather.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and
Fetching the data, please wait...