Dulux Weathershield Powerflexx

Protection from cracks and any weather attack
Irish Acres 10GY 41/600
Change Colour
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Low Sheen
  • Coverage Up to 12 m²/litre
  • Drying Time Single coat at standard thickness: Dependent on temperature and humidity. Recoat: 2-3 hours
  • Coats 2
Product Features
  • Ultimate Crack proof - cover 10X* wider cracks
  • Ultimate Weather Resistant
  • Ultimate Water Repellent
  • Up to 12 years protection (T&C apply)
  • KeepCool™
  • Low VOC, low odour

Product Description

Dulux Weathershield Powerflexx is a top quality elastomeric exterior wall paint with highly advanced Triple Defence Technology that stretches more to cover 10X* wider cracks, providing water repellence and protection against extreme weather conditions.

Health & Safety

Treatment such as sanding, burning off etc of paint films may genearte hazardous dust and/or fumes. Wet sanding/flatting should be used whenever possible. Work in well ventilated areas. Use suitable personal protection equipment. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well-ventilated areas. Remove as much paints as possible from brushes and rollers before cleaning. Avoid release to the environment. Collect spillage. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleanser. Call a Poison Centre or doctor if you feel unwell. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional/user on request. Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Download Adobe Reader

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Dulux Primer. It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 15%. These walls should be left to dry further.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Keep away from food, drinks and animal feed. Store in a cool and shaded place.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living room

Add a new job

  • Kitchen
  • Bedroom
  • Living room

Edit a job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save colour

Irish Acres 10GY 41/600

Save to My Workspace

Save product

Dulux Weathershield Powerflexx

Save job

Sorry, we couldn't find any results
Fetching the data, please wait...