Dulux Timbercolour

Acrylic exterior wood finish
Seaweed Medley 80GG 12/182
Change Colour
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Low Sheen
  • Coverage 12 m²/L
  • Drying Time Drying time : 2-3 hours under normal conditions
    Recoat 2 : 2-3 hours under normal conditions
  • Coats 2
Product Features
  • Long-lasting colours with weather protection
  • Protection against cracking, flaking & peeling with algal and fungal resistance
  • Opaque colours available through tinting

Product Description

Dulux Woodcare Timbercolour gives exterior surfaces such as timber, galvanized iron gutters and downpipes a low sheen finish with long lasting colours.
This water-based acrylic paint offers good algae and fungus resistance. Dulux Woodcare Timbercolour also protects surfaces against cracking, flaking and peeling.

Health & Safety

Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Wear eye/hand protection. Do not breathe vapour/ spray. Do not eat, drink or smoke when using this product. Use only in well-ventilated areas. Remove as much paints as possible from brushes and rollers before cleaning. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. IF ON SKIN (or hair)- Take off immediately all contaminated clothing. Rinse skin with water or shower and soap or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional user on request. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher- Never use water jet. If medical advice is needed, have product container or label at hand.
Download Adobe Reader

Tips & Advice

  • 1. Preparing the Surfaces
    Surface must be sound, clean, dry and free from all defective or poorly adhering
    material, dirt, grease or wax and be thoroughly rubbed down using a suitable
    abrasive paper working in the direction of the grain and dusted off. Clean off all dirt,
    mould, algae, lichen or moss with a wire brush. Treat areas affected by fungi or
    algae with Dulux Fungicidal Wash.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Keep out of reach of children. Keep away from heat/sparks/open flame. - No smoking. Keep away from combustible material. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living room

Add a new job

  • Kitchen
  • Bedroom
  • Living room

Edit a job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save colour

Seaweed Medley 80GG 12/182

Save to My Workspace

Save product

Dulux Timbercolour

Save job

Sorry, we couldn't find any results
Fetching the data, please wait...