Dulux Sealer (Water-based)

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Coverage 11 m²/litre
  • Drying Time 2 - 4 hours
  • Coats 1
Product Features
  • Alkali resistance
  • Environmentally preferred paint (Singapore GreenLabel certified)
  • Improves adhesion
  • Low VOC

Product Description

Surface preparation product - a high quality styrene acrylic water-based sealer for
interior and exterior masonry surfaces such as brickwork, plaster, cement and
textured walls. It is suitable for use on both new and previously painted surfaces.
Dulux Sealer (water-based) conforms to the Singapore Green Labelling Scheme
(032-038-0506).

Health & Safety

Keep out of the reach of children, away from food, drinks and animal feed. Keep away from combustible material and sources of ignition – no smoking. Avoid contact with skin or eyes. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well ventilated areas. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Remove as much paints as possible from brushes and rollers before cleaning. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Do not use empty container for storing food. If swallowed seek medical advice immediately and show this container or label. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher- Never use water Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into drains or water course. Dispose of used container in compliance with local regulation. Safety data sheet available for professional user on request.
Download Adobe Reader
  • DULUX SEALER (WATER_BASED) A931-1050_01.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Surface must be sound, clean, dry and free from all defective or poorly adhering
    material, dirt, grease or wax and be thoroughly rubbed down using a suitable
    abrasive paper and dusted off. Treat areas affected by fungi or algae with
    Dulux Fungicidal Wash.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator