Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
If you have concerns about your privacy?
Read our Privacy Policy.
No Colour Selected

Dulux Satinwood
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Semi-gloss
-
Coverage 15 m²/litre
-
Drying Time 6 hours
-
Coats 2
-
Provides long lasting protection
-
No added lead and mercury
Product Description
For Wood and Metal – Interior
Health & Safety
Keep out of the reach of children, away from food, drinks and animal feed.
Keep away from combustible material and sources of ignition – no smoking.
Avoid contact with skin or eyes. Wear eye/hand protection.
Do not breathe vapour/spray. Use only in well ventilated areas.
Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
Remove as much paints as possible from brushes and rollers before cleaning.
Store in a cool and shaded place.
Container must be in a secure, upright position and be tightly closed.
Do not use empty container for storing food.
If swallowed seek medical advice immediately and show this container or label.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners.
In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher- Never use water
Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into drains or water course. Dispose of used container in compliance with local regulation.
Safety data sheet available for professional user on request.
- DULUX SATINWOOD A345_01.pdf
Tips & Advice
-
1. Preparing the SurfacesSurface must be clean, dry and free from all defective or poorly adhering material,
dirt, grease or wax etc. Previously painted surfaces should be thoroughly rubbed
down using a suitable abrasive paper and then dusted off. Steel surfaces should be
manually prepared by power or hand tool to SS542:2008 (code of practice for the
painting of building). For optimum performance new galvanized and aluminium
surfaces should be cleaned and degreased, then pre-treated with an appropriate
pre-treatment primer to ensure good adhesion. -
2. CleaningClean all equipment with Dulux Thinner 850-41 or white spirit immediately after use.
-
3. StoringObserve the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook. This product has a flash point below 32 degrees Celcius. It must be stored in accordance with the Petroleum (Safety Measures) Act 1984.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator