Dulux Inspire Interior Matt

Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage A guide to the theoretical coverage which can be achieved under normal conditions is 10 - 11 m2/L.
  • Drying Time Single coat at standard thickness:
  • Coats 2
Product Features
  • Anti-mould & Anti-fungus
  • High Coverage
  • Smooth matt finish
  • LONG LASTING
Dulux Inspire Interior Matt contains advanced Chroma Brite Technology to give beautiful long
lasting colours that makes your wall look fresh and with matt finish. It also provides good coverage
to deliver a smooth finish. With Dulux Inspire Interior Matt, your home will always look fresh and
welcoming. In compliance to Singapore Green Label.
Treatment such sanding, burning off etc of paint films may genearte hazardous dust and/or fumes. Wet sanding/flatting should be used whenever possible. Work in well ventilated areas. Use suitable personal protection equipment. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well-ventilated areas. Remove as much paints as possible from brushes and rollers before cleaning. Avoid release to the environment. Collect spillage. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional/user on request. Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt,
    grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off.
    Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after
    thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Dulux
    Sealer/Primer (see below). It should not be applied on areas where moisture reading (as
    measured by Protimeter) exceeds 16%. These walls should be left to dry further.
  • 2. After use
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
Fetching the data, please wait...