Dulux Inspire Interior Glow

Dulux Inspire Interior Glow

Jordan 90BG 50/157
Change Colour
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Gloss
  • Coverage A guide to the theoretical coverage which can be achieved under normal conditions is 16-18 m2/L.
  • Drying Time Single coat at standard thickness:
    Touch Dry: 2-4 hours.
    Recoat: 6-8 hours.
  • Coats 2
Product Features
  • Low VOC, low odour
  • Non yellowing
  • Fast drying time
Dulux Inspire Gloss comes with the Chroma Brite Technology that makes
the surfaces stay bright in colour and smooth finish. It also provides good
gloss retention.
Brush or Roller-For painting of large surfaces like door, roller should be used to achieve optimum flow and finishing
Thinning is usually not necessary after thorough stirring. If required, dilute the paint up to 10% with water. Dilution above 20% will affect the performance of the paint.
Conventional Spray-Dilute the paint with 10%-20% of water.
Airless Spray-Ready for use
Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Avoid contact with skin.Contains- ETHYL METHYL KETOXIME, COBALT CARBOXYLATE. May produce an allergic reaction. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from skin, use soap and water or a recognized cleanser. If swallowed seek medical advice immediately and show this container or label.
Download Adobe Reader
  • 1. Preparing the Surfaces
    Surfaces generally must be clean, dry, free from all defective or poorly
    adhering material, dirt, grease, wax etc. Previously painted surfaces
    should be thoroughly rubbed down using a suitable abrasive paper or wire
    brushed to remove millscales and rust, and then dusted off.
    Steel surfaces should be manually prepared by power or hand tool to BS
    7079 Part A1 : St3. For optimum performance new galvanized and
    aluminium surfaces should be cleaned and degreased, then pre-treated
    with an appropriate pre-treatment primer to ensure good adhesion.
  • 2. After use
    Clean all equipment with clean water immediately after used.
  • 3. Storing
    Keep out of reach of children. Keep away from combustible material. Keep away from food, drinks and animal feed. Container must be in a secure, upright position and be tightly closed.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Kitchen
  • Bedroom
  • Living room

Add a new job

  • Kitchen
  • Bedroom
  • Living room

Edit a job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save colour

Jordan 90BG 50/157

Save to My Workspace

Save product

Dulux Inspire Interior Glow

Save job

Sorry, we couldn't find any results
Fetching the data, please wait...