Subtle Camouflage 14gy 76/113
Change colourDulux Weathershield Powerflexx
Protection from cracks and any weather attack
Do you know the area?
Key Information
-
Finish Low Sheen
-
Coverage ≈ 12.5 m²/L
-
Drying Time 2-3 hours
-
Coats 2
Product description
Exterior Paint
Product Features
Keep Cool™, heat reflective property, reduces surface temperature by up to 5 degree Celsius*
Savings up to 15% on the energy used to cool your home
Colour Lock Technology, protects against colour fading caused by UV
Premium quality elastomeric paint
Stay Clean Technology resists dirt and dust build up
Crack and Rain proof
Resists peeling and flaking
Superior alkaline resistance
Fungus & algae resistance
Covers hairline cracks
6 years weather protection
Low odour, even when freshly painted
Environmentally preferred paint (Singapore GreenLabel certified)
No added lead and mercury
Tips & Advice
Preparing the Surfaces
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Fungicidal Wash. Make good minor defects with a suitable exterior grade Filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further. Note: Do not apply Dulux Weathershield Powerflexx during wet weather.
Storing
Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
Health & safety
Hazard warnings
Keep out of the reach of children, away from food, drinks and animal feed.
Avoid contact with skin or eyes. Wear eye/hand protection.
Do not breathe vapour/spray. Use only in well ventilated areas.
Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
Remove as much paints as possible from brushes and rollers before cleaning.
Store in a cool and shaded place.
Container must be in a secure, upright position and be tightly closed.
Do not use empty container for storing food.
If swallowed seek medical advice immediately and show this container or label.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners.
Avoid release to environment. Do not empty into drains or water course. Dispose of used container in compliance with local regulation.
Safety data sheet available for professional user on request.