Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
If you have concerns about your privacy?
Read our Privacy Policy.
Dulux Satinwood
-
Finish Semi-gloss
-
Coverage 12 m²/litre
-
Drying Time Drying time : 6-8 hours under normal conditions
Recoat 2 : Min 8 hours under normal conditions -
Coats 2
-
Provides long lasting protection
-
No added lead and mercury
Product Description
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesSurface must be clean, dry and free from all defective or poorly adhering material,
dirt, grease or wax etc. Previously painted surfaces should be thoroughly rubbed
down using a suitable abrasive paper and then dusted off. Steel surfaces should be
manually prepared by power or hand tool to SS542:2008 (code of practice for the
painting of building). For optimum performance new galvanized and aluminium
surfaces should be cleaned and degreased, then pre-treated with an appropriate
pre-treatment primer to ensure good adhesion. -
2. CleaningClean all equipment with white spirit immediately after use. In the event of an accident, contain and collect spillage using sand or earth.
-
3. StoringObserve the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook. This product has a flash point below 32 degrees Celcius. It must be stored in accordance with the Petroleum (Safety Measures) Act 1984.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
Dulux Satinwood